News Center

Home

Characteristics of three-phase asynchronous motors

Release time:

2024-04-18

Three-phase asynchronous motor characteristics have the following aspects, the speed regulation mode has stepless speed regulation, frequency conversion speed regulation, working voltage speed regulation three kinds. The following is just a brief description of the frequency conversion speed regulation.

　　If the universal three-phase explosion-proof motor is adjusted with a single reversing synchronous motor, the windings can be connected to the input and output of the three-phase asynchronous motor. This method should deal with high-frequency damage to the power capacitors and damage to the auxiliary windings. For phase problems, power capacitors should be used with high-frequency, high-voltage fixed power capacitors. Series reactors are used to block the damaging effects of power capacitors on explosion-proof motors and to filter out high-frequency harmonic currents.

　　In the case of three-phase asynchronous motor, reduce the elliptic rate of electromagnetic oscillation, reduce the phase difference and torque characteristics of three-phase asynchronous motor windings, compensate for the working voltage of the windings, and improve the torque characteristics of the motor is improved. This type of speed control is low cost, but the operating scale is small and the speed is lower than the torque. For single-phase starting motors with starting power circuits planned to run for a short period of time, the above method is equally applicable after changing to capacitor-driven motors, but the torque characteristics and control measures should be changed appropriately according to the actual situation. Role of three-phase asynchronous motor.

　　The application of frequency converter can change the three-phase AC multithreaded motor into a two-phase motor, which can remove all the working capacitance of single-phase running and single-phase starting three-phase asynchronous motor, and centrifugal When the fan starts the power switch, the motor has a good running torque. It is determined by the operating voltage of the equivalent circuit of the main winding and auxiliary winding inverter machinery and equipment, and the concavity of the operating voltage of the equivalent circuit of each winding can be determined. This can enhance or improve the running and operating torque characteristics of the motor. Single-phase electric multi-threaded motor to two-phase electric power switch, can be a reasonable solution to the explosion-proof motor applications must be resolved, but due to the selection of the cost of increasing multi-electromechanical equipment.

　　If you choose a general three-phase protection of the main and secondary winding current phase angle is significantly lower than 90 °, three-phase asynchronous motor can rotate, but in order to better obtain the torque characteristics of the ring electromagnetic oscillation and the desired torque must be changed to enable single pulse control, that is: change the main parameters of the frequency oscillator, so that UWVAUUV90 °. While it's great to have such a control, calibrating frequency electric actuators is confusing. There are now also three-phase multi-threaded motor control boards that work in conjunction with each other in peripheral circuits to operate three-phase multi-threaded motors via three-phase inverter power bridge circuits.

Return to List →